An alkyd resin-based, oil-based, transparent wood preservative with a satin finish.
It is slightly thixotropic and does not drip. It is resistant to all weather conditions and UV rays. It provides complete protection. It makes wood waterproof. It prevents moisture formation thanks to its breathable structure. It has a flexible structure and does not cause cracking or breaking. It provides a decorative, aesthetic appearance without spoiling the natural look of the wood.
Usage Areas: It can be used safely on all wooden surfaces on exterior and interior facades, pergolas, doors, windows, garden furniture, gazebos, and especially for repainting and protecting worn wood. It provides extra protection for soft woods.
Surface Preparation
The surface must be clean, dry, and completely free of any grease, varnish, and chemicals. If applying to a raw surface, the surface should be painted after impregnation. Old painted surfaces must be stripped of old paint, sanded, and all dust must be removed from the surface.
Application
Shake the can well before use. After opening the can, stir the product until it is homogeneous. HL-4 SOLID LASUR is ready for use. After applying the primer coat, apply it to the surface without thinning. Wait 12 hours between coats. Two coats are recommended. When applying with a spray gun, HL-4 SOLID LASUR should be thinned with 5% JARSEN P 410 synthetic thinner.
Thinning: The product is ready to use.
Tools Used: Application can be done with a brush, etc., or a paint sprayer.
Technical Specifications:
Appearance: Transparent; color chart
Gloss: Silk matte
Wet film thickness: 70-80 microns
Solid content: 58-60%
Density: 0.910 - 0.950 g/cm3
Viscosity: Light thixotropic
Dust protection: 4-6 hours
Additional coat painting: 12 hours
Final drying: 24 hours
(Drying values are determined at 230C and 60% humidity. Values may vary depending on ambient temperature and humidity.)
Consumption: 13-15 m²/L per coat, depending on the surface
Storage Conditions: Store in closed containers in a dry, clean, frost-free environment.
Hazard Warnings
S2: Keep out of reach of children.
S3/7/9: Keep container tightly closed in a cool, well-ventilated place.
S16: Keep away from sources of ignition. No smoking.
S 23: Do not breathe vapors.
S 24: Avoid contact with skin.
S38: In case of inadequate ventilation, use appropriate respiratory equipment.
S51: Use only in well-ventilated areas.
Note: 10 does not contain colorless pigment and therefore does not protect against UV rays on exterior surfaces. Its use on exterior surfaces is not recommended.
Note: 35 Antique Pine is only available in the HL-4 Solid Lasur product color palette. 00 White, 30 Pine, and 10 Colorless are not available in the HL-4 Solid Lasur color palette.
Please review the technical information page before using our products. The colors shown may vary due to printing.